Front Left Drive Shaft for Suzuki Alto & Celerio 1.0 – DSU104

<h2>Vehicle Fitment & Part Details</h2> <p>This front left drive shaft (DSU104) is listed for the Suzuki Alto and Celerio 1.0 hatchback, with supplied dimensions of 23 x 22 x 662 mm. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.</p> <h3>Key Details</h3> SKU DSU104 Component Drive Shaft Position Front Left Configuration Single Primary Fitment Suzuki Alto MK VII 1.0 (2009-) Specs Dimensions 23 x 22 x 662 mm <h3>Listing Highlights</h3> <ul> <li>Listed for the Suzuki applications shown in the fitment table.</li> <li>Supplied dimensions 23 x 22 x 662 mm for comparison against the removed shaft.</li> <li>Supplied as a single drive shaft.</li> </ul> <h3>Vehicle Fitment</h3> <p>This drive shaft is listed for 3 applications, all Suzuki hatchback: the Alto MK VII 1.0 from 2009 onwards, the Alto K10 MK I 1.0 from 2012 to 2014, and the Celerio 1.0 VVT from 2014 onwards. Use the full table below to confirm model, transmission, year range and engine before ordering.</p> <table> <tr> <th>Model</th> <th>Engine</th> <th>Transmission</th> <th>Years</th> </tr> <tr> <th>Alto MK VII</th> <td>1.0 (K10B)</td> <td>Automatic 4 speed / Manual 5 speed</td> <td>2009-</td> </tr> <tr> <th>Alto K10 MK I</th> <td>1.0 (K10B)</td> <td>Manual 5 speed</td> <td>2012-2014</td> </tr> <tr> <th>Celerio</th> <td>1.0 VVT (K10BS, K10C)</td> <td>Automatic 5 speed / CVT / Manual 5 speed</td> <td>2014-</td> </tr> </table> <h3>Fitment Notes</h3> <ul> <li>Always match vehicle details before ordering. Verify VIN/engine.</li> </ul> <p><strong>Important:</strong> With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need an inner CV joint, outer CV joint, CV boot, or complete driveshaft. Then match the removed unit by outer spline count, inner spline count, seal size (mm), outer diameter (mm), groove position, overall length (mm), and ABS ring tooth count where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.</p> <p><strong>Returns Notice:</strong> CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.</p> <h3>Compatibility Verification Notes</h3> <ul> <li>Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.</li> <li>Confirm left / right side and inner / outer position, and compare the supplied dimensions to the removed unit before ordering.</li> <li>Fitment data may vary by production date, market, import history and engine variant.</li> <li>Open-ended dates, such as "2009-", reflect supplier catalogue data and must be confirmed against the vehicle before ordering.</li> <li>This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.</li> </ul> <h3>Common Questions</h3> <p><strong>Will this front left drive shaft fit my Suzuki Alto?</strong><br/> This part (DSU104) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.</p> <p><strong>What is the difference between this and the front right shaft?</strong><br/> This listing is the front left shaft (DSU104). The front right shaft is listed separately as DSU105 and has a different overall length. Check the fitment table on each listing and confirm the side on the vehicle before ordering.</p> <p><strong>How do I confirm fitment if there are multiple variants?</strong><br/> Compare the supplied fitment details, original part details and any listed variant information before ordering. Verify VIN/engine.</p>