FAE Coolant Temperature Sensor for Nissan 1 Tonner & Nissan Laurel – 31690

<h2>Vehicle Fitment & Part Details</h2><p>This FAE coolant temperature sensor is listed for the Nissan 1 Tonner and cross-references OE 25080 89902. It has a 5/8 x 18 UNF thread. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.</p><h3>Key Details</h3>SKU31690ComponentCoolant Temperature SensorBrandFAEPart MPN31690OEM References<ul><li><strong>Nissan:</strong> 25080 89902</li></ul>Alternate OEM Search References2508089902Primary FitmentNissan 1 Tonner 1600 (1988-1995)Specs1 spade terminal, 5/8 x 18 UNF thread, spanner size 17<h3>Listing Highlights</h3><ul><li>Listed for selected applications shown in the fitment table.</li><li>Cross-referenced to listed OE numbers for compatibility checking before ordering.</li><li>Supplied with a single spade terminal and a 5/8 x 18 UNF thread.</li></ul><h3>Product Specifications</h3><table><tr><th>Specification</th><th>Value</th></tr><tr><th>Terminal Type</th><td>1 spade terminal</td></tr><tr><th>Thread Size</th><td>5/8 x 18 UNF</td></tr><tr><th>Spanner Size</th><td>17</td></tr></table><h3>Vehicle Fitment</h3><p>This coolant temperature sensor is listed for 20 applications, all Nissan, covering 1 Tonner 1600, 1800, 2400, 2500, 2.7D and V6 2x4, Hardbody 1600 and 2000, Sani 2.4 4X4 and 3.0 4X2, Laurel 2.8 and 2.8 SGL, Skyline New GL and 2.8GTX, 200 SX 1.8 Turbo, Langley 1300GL, 2200 Diesel LDV, 2300 Diesel, Cabstar and Tracker 4X4, with supplied year coverage from 1980 to 1999. Use the full table below to confirm model, year range and engine before ordering.</p>View Full Vehicle Fitment (20 applications)<table><tr><th>Model</th><th>Years</th><th>Engine</th></tr><tr><th>200 SX 1.8 Turbo</th><td>1989-1991</td><td>CA18DET</td></tr><tr><th>Langley 1300GL</th><td>1986-1987</td><td>E13</td></tr><tr><th>Laurel 2.8</th><td>1980-1984</td><td>L28</td></tr><tr><th>Laurel 2.8 SGL</th><td>1980-1987</td><td>L28E</td></tr><tr><th>Skyline New GL</th><td>1987-1992</td><td>CA20S</td></tr><tr><th>Skyline 2.8GTX</th><td>1982-1987</td><td>L28</td></tr><tr><th>2200 Diesel LDV</th><td>1980-1985</td><td>SD22</td></tr><tr><th>2300 Diesel</th><td>1985-1988</td><td>SD23</td></tr><tr><th>1 Tonner 1600</th><td>1988-1995</td><td>L16S-J</td></tr><tr><th>1 Tonner 1800</th><td>1988-1995</td><td>L18S-R</td></tr><tr><th>1 Tonner 2400</th><td>1988-1998</td><td>Z24S</td></tr><tr><th>1 Tonner 2500</th><td>1988-1996</td><td>TD25I</td></tr><tr><th>1 Tonner 2.7D</th><td>1990-1999</td><td>TD27</td></tr><tr><th>1 Tonner V6 2x4</th><td>1990-1999</td><td>VG30E</td></tr><tr><th>Cabstar</th><td>1984-1990</td><td>L28</td></tr><tr><th>Hardbody 1600</th><td>1996-1999</td><td>NA16</td></tr><tr><th>Hardbody 2000</th><td>1995-1998</td><td>NA20</td></tr><tr><th>Sani 2.4 4X4</th><td>1992-1996</td><td>Z24</td></tr><tr><th>Sani 3.0 4X2</th><td>1992-1999</td><td>VG30E</td></tr><tr><th>Tracker 4X4</th><td>1985-1988</td><td>Z22</td></tr></table><h3>Fitment Notes</h3><ul><li>Always match OEM reference number(s) and vehicle details before ordering. Verify VIN/engine.</li></ul><p><strong>Professional Fitment Required:</strong> Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.</p><p><strong>Returns Notice:</strong> Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.</p><h3>Compatibility Verification Notes</h3><ul><li>Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.</li><li>Compare the supplied identifiers to the original part, including terminal type, thread size and spanner size.</li><li>Match the supplied fitment details to your vehicle, including model, year range and any listed engine information.</li><li>Fitment data may vary by production date, market, import history and engine variant.</li><li>This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.</li></ul><h3>Common Questions</h3><p><strong>Will this coolant temperature sensor fit my Nissan 1 Tonner?</strong><br/>This part (31690) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.</p><p><strong>What OEM part numbers does this cross-reference?</strong><br/>Cross-reference numbers are listed in the Key Details section above. Match at least one to your original part before ordering.</p><p><strong>What brand is this part?</strong><br/>This listing is for FAE coolant temperature sensor.</p><p><strong>How do I check I have the right thread and terminal?</strong><br/>This sensor has a single spade terminal and a 5/8 x 18 UNF thread, with spanner size 17. Compare these against the removed unit before ordering.</p><p><strong>How do I confirm fitment if there are multiple variants?</strong><br/>Compare the supplied fitment details, OE reference numbers, original part details and any listed variant information before ordering. Verify VIN/engine.</p>