Carbon Brush Holder 12V Starter Motor 73mm OD 35mm ID (BHS1036)

<h2>Intro</h2> <p>The carbon brush holder (BHS1036) is a precision 12V starter motor component engineered to restore reliable cranking and stable current transfer. Built to OE-style dimensions, it performs consistently in South African driving and fleet conditions.</p> <h2>Vehicle Compatibility</h2> <p>This part is suitable for 12V starter motors rated around 1.82.0 kW where the dimensions below match. Please confirm by measuring the original holder and brush sizes before installation.</p> <h2>Specifications</h2> <ul> <li>SKU / Reference: <strong>BHS1036</strong></li> <li>Voltage: 12 V</li> <li>Power Rating: 1.8 / 2.0 kW</li> <li>Outer Diameter: 73 mm</li> <li>Inner Diameter: 35 mm</li> <li>Height: 24 mm</li> <li>Brush Length: 15 mm</li> <li>Brush Width: 17 mm</li> <li>Brush Height: 5.8 mm</li> <li>Cable Length: 15 mm</li> </ul> <h2>Features</h2> <ul> <li>OE-style geometry for accurate seating and even brush wear</li> <li>Durable carbon compound for consistent conductivity</li> <li>Sized for 12 V starters in the 1.82.0 kW range</li> <li>Helps reduce voltage drop and hot-start complaints</li> </ul> <h2>Why Buy From Us</h2> <ul> <li>Local South African stock for fast dispatch</li> <li>12-month warranty for peace of mind</li> <li>Expert fitment advice for workshop and DIY installs</li> </ul> <h2>Installation & Maintenance Tips</h2> <ul> <li>Disconnect the battery before any starter work.</li> <li>Inspect commutator/slip rings; clean or machine if pitted.</li> <li>Ensure brushes move freely in the holder and springs have proper tension.</li> <li>Check bushings/bearings and the solenoid while the starter is out.</li> </ul> <h2>Closing</h2> <p>Nationwide delivery across Johannesburg, Cape Town, Durban, Pretoria, Gqeberha, Bloemfontein, Polokwane, Nelspruit, and more. (BHS1036)</p> <h2>FAQ</h2> <p><strong>Q: Will this fit my starter?</strong><br/>A: Match by voltage (12 V), power rating (1.82.0 kW), and key dimensions: 73 mm OD, 35 mm ID, 24 mm height, brush 15175.8 mm.</p> <p><strong>Q: Does it include the carbon brushes?</strong><br/>A: Yes, the brushes are integrated in the holder assembly with 15 mm cables.</p> <p><strong>Q: Can I use it on higher-output starters?</strong><br/>A: Its intended for ~1.82.0 kW starters. Using it outside spec may reduce service life.</p>{ "@context":"https://schema.org", "@type":"FAQPage", "mainEntity":[ { "@type":"Question", "name":"Will this fit my starter?", "acceptedAnswer":{ "@type":"Answer", "text":"Match by voltage (12 V), power rating (1.82.0 kW), and key dimensions: 73 mm OD, 35 mm ID, 24 mm height, brush 15175.8 mm." } }, { "@type":"Question", "name":"Does it include the carbon brushes?", "acceptedAnswer":{ "@type":"Answer", "text":"Yes, the brushes are integrated in the holder assembly with 15 mm cables." } }, { "@type":"Question", "name":"Can I use it on higher-output starters?", "acceptedAnswer":{ "@type":"Answer", "text":"Its intended for approximately 1.82.0 kW starters. Using it outside spec may reduce service life." } } ]}<em>Trusted by thousands of South African drivers for quality and durability.</em>