Alternator for Chevrolet Utility Pick-up – ALT0120

<h2>Vehicle Fitment & Part Details</h2><p>This alternator for the Chevrolet Utility Pick-up has a 12 V voltage rating and 60 A charging current. The alternator generates electrical power and charges the battery while the engine runs. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.</p><h3>Key Details</h3>SKUALT0120ComponentAlternatorPrimary FitmentChevrolet Utility Pick-up (12/2011-12/2017)Specs12 V; 60 A; 5-rib, 5-groove pulley; internal regulator and internal fan (IR/IF); 2P F-L pin connection<h3>Listing Highlights</h3><ul><li>Alternator rated at 12 V and 60 A with a 5-rib pulley.</li><li>Internal regulator and internal fan (IR/IF), with 2P F-L pin connection.</li><li>Listed for three Chevrolet Utility Pick-up applications detailed below.</li></ul><h3>Product Specifications</h3><table><tr><th>Specification</th><th>Value</th></tr><tr><th>Voltage</th><td>12 V</td></tr><tr><th>Alternator charging current</th><td>60 A</td></tr><tr><th>Pulley</th><td>5-groove, 5 ribs</td></tr><tr><th>Alternator type</th><td>IR/IF (internal regulator, internal fan)</td></tr><tr><th>Pins</th><td>2P F-L</td></tr></table><h3>Vehicle Fitment</h3><p>This alternator is listed for 3 Chevrolet Utility Pick-up applications: 1.4 and 1.8 petrol models with supplied year coverage through 2017, and the 1.3 CDTI diesel model listed from 2011 onwards. Use the full table to confirm model, year range, engine and power before ordering.</p><table><tr><th>Model</th><th>Years</th><th>Engine</th><th>Power</th></tr><tr><th>Utility Pick-up</th><td>12/2011-12/2017</td><td>1.4 Petrol (X 14 YEH, X 14 YFH, C 14 SE)</td><td>68 kW / 92 HP</td></tr><tr><th>Utility Pick-up</th><td>10/2011-05/2017</td><td>1.8 Petrol (LJ1, N18XFH)</td><td>77 kW / 105 HP</td></tr><tr><th>Utility Pick-up</th><td>01/2011-onwards</td><td>1.3 CDTI Diesel (LDP, Z 13 DTJ)</td><td>55 kW / 75 HP</td></tr></table><h3>Fitment Notes</h3><ul><li>Always match vehicle details before ordering. Verify VIN/engine.</li><li>Supplier fitment dates for the 1.3 CDTI are open-ended; confirm the exact production details before ordering.</li></ul><p><strong>Professional Fitment Required:</strong> Electronic, electrical, and electromechanical components require correct identification before installation. Compare the new unit to the removed unit and verify mounting orientation, terminal or connector type, pin count or terminal arrangement, voltage rating, polarity, and any pulley or bracket configuration where applicable. Incorrect installation, polarity reversal, water or moisture ingress, improper connector seating, or mismatched specifications can damage the component, related ECU systems, or cause persistent fault codes. Installation by a qualified, VAT-registered workshop with appropriate diagnostic equipment is recommended.</p><p><strong>Returns Notice:</strong> Once an electronic, electrical, or electromechanical component has been fitted, plugged in, energised, or shows signs of installation, returns are limited to manufacturing defect only. Confirm part compatibility before opening sealed packaging.</p><h3>Compatibility Verification Notes</h3><ul><li>Confirm compatibility using VIN, engine code, chassis / platform and original part comparison before ordering.</li><li>Match the 12 V and 60 A ratings, 5-groove pulley and 2P F-L connection against the original unit.</li><li>Fitment data may vary by production date, market, import history and engine variant.</li><li>This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.</li></ul><h3>Common Questions</h3><p><strong>Will this alternator fit my Chevrolet Utility Pick-up?</strong><br/>This part (ALT0120) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.</p><p><strong>Which electrical and pulley specifications should I match?</strong><br/>Compare the original alternator with the listed 12 V rating, 60 A charging current, 5-groove pulley, IR/IF design and 2P F-L pin connection.</p><p><strong>How do I confirm fitment if there are multiple variants?</strong><br/>Compare the supplied fitment details, original part details and the listed specifications before ordering. Verify VIN/engine.</p>